Record Streaming Audio On A Mac With Garageband
You can record audio on Mac using QuickTime and GarageBand. But there are some third party apps which are free to use and provide more features. Audacity App is a free and open source application for audio recording and editing. It has lots of features to customize the audio recording on Mac. For the safest results, record your screen this way in chunks of just a few minutes each time. In our experience, you can record one half-hour webinar's audio fine. Another quick guide from KRCS Apple DoncasterHow to record audio from within your Mac using GarageBandKRCS Apple Doncaster - Your local Apple experts. Use the Audio Recorder in GarageBand for iPad. Using the Audio Recorder, you can record your voice, an instrument, or any other sound using the microphone on your iPad, and play it back in GarageBand. You can also record sounds using an external microphone connected to your iPad. The Audio Recorder has two sets of controls you can use to change.
Every once in a while you might have audio that you want to record on your computer with the internal mic. For me, I occasionally record phone conferences so that I can review the information after the meeting, then I need to re-record them because of the recording tools we use through my company (it also helps to listen to the recording again). I was frustrated by the newer operating systems in both Mac and PC doing away with the easy ability to record internal audio (so that no outside sounds can be heard). If you use a Mac with the Lion operating system or higher, follow these steps to record audio on your computer.
Programs you need:
Soundflower – Download
Garageband – Comes with Mac OS.
1. Download Soundflower and install.
2. Open System Preferences and click the Sound icon.
3. Select Soundflower (2ch) as Output and Input.
4. Open Garageband and create a new track. Don’t click create yet.
5. Select Real Instrument.
6. Open the Instrument Setup Section.
7. Set the options as shown:
My instrument is connected with: Soundflower (2ch)
I hear sound from: System Setting
Check the box for “I want to hear my instrument as I play and record.”
8. Make sure that your source sound is queued up.
9. Click record in Garageband.
10. Start playing your source sound.
11. Click stop in Garageband when you are done.
After your recording is complete, make sure that you set your System Preferences back to Built-in Microphone and Built-in Speakers so that your sound works normally again.
GarageBand is more than a simple app to edit music. There’s more to it as long as you have a knowhow its features and functionalities. What’s interesting about GarageBand is that it gives you the ability to create podcasts, soundtracks and audio slideshows as well. Regardless of what people say, podcasts have revolutionized the way content is created. Thousands of people create audio programs and almost anyone can listen to them at any given time. You can be a part of the action too and all it requires is a little bit of interest and GarageBand to aid your cause.
One of the best things about GarageBand is it is incredibly easy to use once you get a hang of it. Eventually, you will be recording, mixing and editing your own podcasts in no time. If you are new to the podcasting scene, and want to learn more about recording a podcast using GarageBand on your Mac, read on.
Staring A New Project
After launching GarageBand, you need to select New Project. You will have several different project types to choose from, and each of them configures GarageBand in a way which it is perfect for the task at hand. After choosing Podcast, you will be presented with a four-track workspace. The workspace will include a special track where you have the ability to add new chapters. That’s not all, you can even add an image for each episode you have in mind. You can also take advantage of the default tracks for female and male voices which could enhance your podcast as well as jingles.
If you already have audio content for your podcast, you can easily drag and drop them from the media browser and position them accordingly. GarageBand gives you the ability to drag and drop audio files into the workspace and even supports formats like MP3, AIFF and WAV.
Recording New Content
In case you do not have any content of your own, you will need to start from scratch. This means you will have to start recording new content for your podcast. This is only possible if you have a microphone connected to your Mac. Or you could simply use the built-in microphone to start recording right away. However, it is highly recommended for new podcasters to invest in a good external microphone. They should find one with a stand, if possible. Not only will this enhance your recordings but you will feel comfortable talking into a microphone which is portable and can be moved about is needed.
(Microfone suggestions: Audio-Technica%20ATR2100-USB Cardioid Dynamic USB/XLR MicrophoneAudio-Technica ATR2100 ($80 on Amazon) or Heil%20PR-40 Dynamic Studio Recording MicrophoneHeil PR-40 Dynamic Studio Recording ($375 on Amazon))
Record Streaming Audio On A Mac With Garageband Recording
Once that’s taken care of, you can begin recording new content by selecting a track and then opening the Track Info Panel. This can also be done by pressing ‘I’ on your Mac’s keyboard to open or close the panel.
After selecting the correct input source from the panel, you need to check the input levels. After choosing Monitor On from within the panel, you can speak into the microphone. Make sure the levels are perfect by adjusting the recording level slider. You should also keep in mind that GarageBand puts a reverb on all vocal tracks by default. This can be enabled or disabled by choosing Vocals and then selecting No Effects. Once you are ready, click on the red button to begin recording your first podcasting session.
After you are done recording, you can access the podcast through Edit. It is highly unlikely your podcast will not have any problems. These problems can be sorted out and corrected with the help of GarageBand’s editor. Not only can you trim the parts that are not required but you can save the parts you actually need.
You can move the playback head to the end of the track for the portions you actually wish to keep. This can be done by pressing ‘Command’ and ‘T’ on your Mac’s keyboard to split the audio where it is required. The same process can be repeated but after selecting the new clip, hitting ‘Delete’ will remove sections from the audio track.
It is easier to edit recordings by cutting down longer sections of an audio track into smaller clips. This is possible by splitting these tracks. You can even rearrange the order of these clips and move them to new or different tracks as well. The possibilities are endless as you will have countless features at your disposal during the editing phase and it could thus affect the overall outcome of the podcast. Not only can you rearrange certain sections by dragging and dropping a clip into a new position but you can combine tracks too. This is possible by pressing ‘CTRL’ and clicking the required clips multiple times. Once you are done, press ‘Command’ and ‘J’ to join these tracks.
After recording and editing the spoken parts of your podcast, you will need to add some music to it. Doing so will add flavor to your podcast and make it interesting. Fortunately, GarageBand offers various music tracks which can be used to soundtrack your recordings. This is be done by accessing GarageBand’s Loop Browser. After locating the Podcast icon at the bottom of the window, choose Jingles. This is perfect if you wish to add your own music snippets to the Jingles track.
Reviewing Your Podcast
A podcast does not require much when it comes to mixing. However, you need to review each track and listen to it carefully. Turn the volume up and ensure there is no distortion. While you review and listen to your recordings, the Ducking tool can come in incredibly handy. After setting themusic tracks or jingles to duck, the volume will automatically be turned on once the spoken parts come in.
Publishing your Podcast on iTunes
After you are done with your podcast, you can make it available to listen at any given time by accessing the iTunes library. However, this is only possible if you publish it on iTunes in the first place. To do so, you will need to access the Share menu and then selecting Send Podcast to iTunes. You will be presented a dialogue box, you can add in details like the name of your podcast and author details. Finally, select Spoken Podcast from Audio Settings to complete the process.
Read more on how to publish your podcast on Itunes here: https://www.apple.com/itunes/podcasts/specs.html
Publishing It on Your Webpage
Now that you have backed up your podcast on iTunes, you will need to publish it somewhere for others to hear. If you have a webpage or a website, you can share these podcasts. To quickly publish your podcast online, you will have to use the share menu. However, this time you will need to select the Export Podcast to Disc instead. The file created will have a M4A extension which can easily be uploaded to your website. However, you are not restricted as you do have the option to share these podcasts on websites like YouTube or SoundCloud.
Once you have uploaded it online, you can use SoundCloud’s player (www.soundcloud.com) and embed it on any website to maximize exposure. You can even use social networking sites like Facebook or Twitter to share your podcast with your friends and family to get the ball rolling. You never know, your podcast could eventually turn out to be as sensational as Richard Herring’s.
Things to Consider While Launching a Podcast
The key to success is to constantly come up with innovative and interesting content for your podcasts. Regardless of how much time you may have spent on each podcast, it will be of little importance if people are not interested in it in the first place. You have to be informative, keep up with current trends and news updates and bring something new to the table in order to set yourself apart from the others.
On the other hand, it is also quite important for you to build your audience at the same time. Be realistic about the time you are spending on each podcast and promote it. Avoid working on several different podcasts simultaneously. Most individuals focus on running their own podcast network and end up affecting their overall production. Remember, be wise and never multitask during your podcast production. Divide your time and spend time focused on each task in order to enhance results.
How To Record Streaming Audio On Mac With Garageband
It is safe to say you now have more than enough information to get started with your first podcast using GarageBand on your Mac. Even though it may seem sufficient at first, there is a lot more for you to learn about recording a podcast and publishing it online. It would be wise to research beforehand to know what you are getting into.
There’s no harm in finding out more about your work and what others have to say about it. You can then work on your podcasts and make them better in order to attract a larger target audience. The only way you are going to succeed is if you keep learning from your mistakes and by making amends along the way for better results.
If you want to learn more, I recommend visiting this sites: